Christmas C2C Crochet Blanket

A few weeks ago the most adorable pictures started popping up on my Instagram feed.  The very talented Sarah aka Repeat Crafter Me started releasing the patterns for her Christmas Character Afghan and while I managed to resist for a couple of weeks, I just knew I had to try out some of the squares she had written. 

I’ve made C2C blankets before but only in single colours or stripes so this was my first time making a ‘graphgan’.  Quite a few people have been asking what yarn I used and for tips on the colour changes.  I used multiple small balls for the different colours so I didn’t have to carry the yarn through too much. For some instances I did – if it was just once pixel of a colour before reverting to the other colour it’s easier to just crochet over your second colour.

I used Stylecraft Special DK yarn for all my squares – it’s DK thickness, and I used a 3.5mm hook.  I also did the traditional C2C method using DC (US terms, or TR in UK terms) rather than the modified version Sarah (Repeat Crafter Me) recommended. She was however using Aran yarn so as mine was thinner I opted for the normal stitch.

Here are the squares I made and the Stylecraft Special DK shades needed:

  Santa: Matador, White, Silver, Black

  Elf: Aster, Green, Matador, Gold, Soft Peach, Fondant and Black

  Snowman: Cloud blue, White, Black, Matador, Green and Spice

  Gingerbread Man: Matador, Walnut, Gold, White, Black and Green

  Rudolph: Sunshine, Walnut, Mocha, Gold, Matador. Black and White

  Sleigh: Sherbert, Matador, Sunshine, Green, White and Black

  Christmas Tree: Green, Greengage (a variegated yarn), Sunshine, Aster, Matador and Brown


Stocking: Silver, Matador, White, Green, Fondant, Claret, Aster, Sherbert and Sunshine

  Christmas Pudding: this square was designed as an alternative by Elemelo Crafts – Repeat Crafter Me designed a wreath but I already had the Christmas tree square which was very green so I chose the Christmas pudding (it’s hubby’s favourite!). Other alternatives are on RCM’s blog.  Colours for this one are: Turquoise, Brown, Matador, Green and White.  I also added in some black pixels at random to make it look like raisins in the pudding.

As suggested on Sarah’s blog I did a SC edge around each square which made joining them easier. Just when I thought the pattern couldn’t get cuter, Sarah released a header and footer banner pattern to top and tail the blanket.  Here are the pics of mine made up:


Yarn: White, Matador, Meadow, Turquoise, Sunshine and Black.

I can’t tell you quantities of yarn used as I was using up my stash but White, Matador and Green were the shades used most, and I didn’t use more than 3 balls of White and 2 balls of Matador.


I chose to crochet my squares together – wrong sides facing each other and SC along the edge.  This gives a raised ridge join which I liked for this design.  I did this for all the squares and then to join the header and footer.  To make sure I evenly spaced the header and footer I found it helpful to use stitch markers to hold the pieces together (in theory you should have the same number of SC on both but in practice it’s tricky adding SC to C2C blocks).



As if the blanket wasn’t festive enough I decided to add a Candy Cane effect border! Firstly I did a round of White SC around the outside of the blanket, followed by a round of Green HDC to make the colours pop.  Then onto the Candy Cane border – I’d seen this method on Pinterest ages ago and after a bit of searching found these instructions here.  I just changed the colours to White and Matador – and also added 2 extra chains to the corner spaces to stop it curling up.  This border did make the edges of my blanket ruffle a bit (might be worth trying it with 3ch instead of 4?) but blocking sorted most of this out.


And Voila! Here’s my finished blanket! Pip loves it and I can’t wait for her to curl up under it at Christmas and we can watch movies together.  It’s bigger than I anticipated ( 46″x56″ ) so it’ll easily cover her bed, which is perfect for Christmas Eve!

 A big thank you to Sarah aka Repeat Crafter Me for designing such a brilliantly fun and festive pattern – this is going to be a Christmas heirloom in our house!x

Winter Sunshine Blanket

As you may know there’s exciting news in our house – we’re expecting an addition to the family….a little brother for Pip! So this summer has been spent on DIY, moving rooms around and very little blogging!

I did manage to get a weekend to myself and booked myself on to a crochet retreat – a whole weekend of crochet with fellow crocheters…bliss! And as part of the weekend there was ALOT of yarn supplied.  I have to admit this was part of the attraction, and it was also great to try out different brands which I haven’t used before.  Which is how my latest blanket came about.

Baby boy is due New Years Day (yep….really) and while it’s a nice and festive time of year, here in the UK it can also mean lots of wet, windy, cold grey days.  So I decided to make a bright, happy blanket for the little guy, to bring a bit of sunshine to those grey days when we’re out walking with the pram.

I’ve also ways loved the Sunburst pattern, and when I saw the Paton’s yarn at the retreat I knew these were the colours for me.  

The yarn is Paton’s Merino Extrafine Aran. It’s gorgeous and squishy and I love the bright colours.  Using the three blue shades I alternated the order to make six different sunburst rounds, and made six of each, for a blanket of 6×6.  I then did the final round in the bright sunshine yellow to square them off, before joining them with a pale grey.  This join is done by SC (US term) the rows together with wrong sides facing which gives a ridge effect on the front of the blanket.  I joined them all horizontally and then vertically to keep the process simple.


Onto the border….I wanted to add some size to it and use the existing colours – here’s the border order:

HDC round in grey, DC light blue, DC turquoise, DC royal blue, DC yellow and then finished off by going round one final time this time with crab stitch (also known as reverse SC) in yellow, which gives a nice solid edge.

This finished dimensions are  27″x 27″ and I used a 4.5mm hook.  



I’m so pleased with the finished blanket and I can’t wait to wrap the little guy up in it this winter!


A handmade Dinosaur birthday party….*roar*

I’ve now had a couple of weeks to recover from Pip’s birthday party – it’s hard to believe my little girl is two already! Since February she’s been adamant she wanted a dinosaur birthday party (and I was secretly very relieved she didn’t choose Frozen) so I had plenty of time to get planning.

Dinosaur egg party bags

Early on I knew I wanted to make some cool party bags, and inspired by Pinterest I decided on making paper mache dinosaur eggs. This was by no means a quick process and after I’d make a couple I found myself quietly cursing Pinterest! Here’s a quick tutorial:

– using regular balloons, blow up to a size that will fit your party bag bits in (the tallest thing in Pip’s party bags was a pencil so the balloons had to be big enough to fit those in). Don’t make them too big as it will take longer to do the paper mache!

– using newspaper cut it into strips. Mix pva glue and water (2 parts glue to 1 part water) and glue the strips onto the balloon.  You can do a couple of layer before leaving to dry.  Once dry do a couple more layers and leave to dry – the newspaper should then feel pretty sturdy and you can then stick a pin in the side and pop the balloon.  I found it helpful to stand the balloon in a bowl while doing the paper mache to stop it rolling around all over the place.

-once you’ve popped the balloon, you can cut a slit at the top (where the balloon knot was).  I cut a couple of slits  of about 7cm coming out from the top at wider than a right angle.  I found I could then get all the goodies in the egg without creating a big hole (You can also try and remove the popped balloon from the middle at this stage if you can). You then need to do a couple more layers of paper mache to seal it up.

– then it’s on to painting! I got hold of some bright crayola paint – it took a couple of coats to cover up the newsprint but I think they turned out pretty well, and I added a few spots to make them look a bit more ‘dinosaury’ 


NB. I would not recommend these for a large party – I made 10 and it took a fortnight!! Also warn parents of small children that there may be bits of popped balloon inside! I’m sure the kids will need a hand opening them – though one child successfully managed to rip his open on the car ride him 😉

Dinosaur garlands

As Pip is pretty active these days I wanted to get her involved in making the decorations for the party. A really simple activity was making a dinosaur garland.

With the help of my lovely friends we drew some dino outlines on bright coloured card and cut them out. We then let Pip and my little god-daughter Izzy decorate them with googly eyes and sticker spots.  Really simple and fun, the girls loved it and I think they did a great job!


Whilst I had my little helpers to hand we also set about making some jungle leaves garlands to decorate the living room.  I stuck some green card to our easel and the girls did some hand painting with orange, yellow and green onto the sheets of card.

I then cut them into leaf shapes and punched holes in the top.  They would have been a bit tricky to tie onto a garland individually so I crocheted a chain of chain stitch (slip stitching into the leaf holes to join them).


Dinosaur cape

Well it wouldn’t be a proper dinosaur party without a costume would it! 

Having looked around for dino costumes I just couldn’t find any cute ones, but I did find a great tutorial here to sew a dinosaur cape.  I adapted it a bit as it suggests using fleece and as this was a summer party I thought cotton might be better, but not much of a difference, I just added a few hems.  I used some stick-on Velcro at the front as a fastening (I didn’t want it to be a choke hazard!) and tada!


 Photo collage

We made Pip a large ‘1’ last year made out of photos from her first year, and we had so many nice comments that I wanted to do another this year – it’s nice to reflect on the last year.  It’s very simple to do – just get a large sheet of rigid cardboard and a stack of printed photos – I used pics from age 1-2 this time.  A bit of arranging, cutting and glueing and voila! It was also a nice activity for me and hubby to do one evening after Pip had gone to bed (no he didn’t manage to escape the crafting!)



And of course the birthday girl needed a suitably dinosaur-themed present.  I’m a huge fan of Heidibears patterns and have made the Happypotamus and Owl designs previously.  But the stegosaurus pattern is adorable! You can see all her patterns here .

These are not quick but once you get the hang of the African Flower pattern the motifs aren’t difficult.  I started this in February to give me plenty of time (and with all those dinosaur eggs I’m glad I did!).  I used Stylecraft Special DK yarn and a lot of toy stuffing! The finished dino is 90cm long, nearly as big as Pip- but she loved it and that’s all I can ask for 🙂


Anyway if you’ve got to the end of my dinosaur ramble thank you for reading! At this rate I should start planning now for Pip’s 3rd birthday! 😉





Summer Harlequin Blanket

I’ve had a harlequin blanket on my crochet to-do list for ages and last month I finally got started (ok, I started it despite having a dozen other projects on the go!) I love the diamond pattern, it’s so different from other blankets and after playing around with my yarn pegs (see previous post) I decided on my perfect colour palette.

They are all Stylecraft Special DK, and the shades are (from the top): Sherbert, Pomegranate, Aspen, Magenta, Sunshine, Lime, Fondant and Turquoise.  There’s a lot of my favourites in this mix but also a lot of people commented on my last post (and on IG) about their favourite combinations so I added in the pomegranate and lime.

I’ve used this pattern from the Solstrikke blog which was great as she has drawn charts for the diamond shape and also the half-diamonds and triangles you will need to fill in the gaps around the edge of your blanket.  I’m a big fan of having the pattern illustrated in chart form and once you get the hang of it you’ll soon be doing it from memory.

So with my eight colours I decided I needed 10 diamonds of each colour to give me a decent lap blanket size (about the right size for a toddler bed too). I used a 4mm hook for these.

  Once I’d memorised the pattern they were very quick and easy to make, taking less than 5 minutes each – perfect for squeezing into toddler nap time!

When I had my 80 diamonds, I found a layout pattern I liked (I wanted it to look random but without having the same colour touching that’s easier said than done! I could then work out how many smaller shapes I needed to fill in the edges.  In this case it was: 10 half diamonds for down the sides, 16 triangles for the top and bottom, and also 2 quarter diamonds (or half triangles) for the opposite corners.

If you’re using lots of colours I’d recommend laying out your blanket and then you can work out which colour shapes to make and what will fit where.


When it came to joining, I opted for Cream as i thought white might be a bit bright and I didnt want to add another bright colour into the mix.

The Solstrikke blog has a joining technique which if you scroll down you can see (I didn’t see this until I’d come up with my modified version!) I went down a hook size to a 3.5mm and did join-as-you-go, adding one diamond to a row at a time (my blanket  is 10 rows of 8 diamonds).  If you join your yarn on a side of the diamond, you’ll be working into the sides of the rows.  I did 3sc into each row space, then at the top and bottom point, I worked 2sc, 3ch, 2sc. Then carried on down the side. At the side points I added 1ch in between the rows on either side.

I’d suggest joining all the whole diamonds together first, then work your way around the edge of the blanket adding the smaller shapes.

Once they were all joined I added a simple cream border to the blanket, by first doing a row of SC all the way around.  Where some shapes joined at the side there was a bit of an indent so in this stitch I made a DC instead to straighten the edge.  I then went round again with a round of HDC and finished off.

The finished blanket measures 110cm wide by 120cm tall (approx 43″x47″) and is the perfect size for cosying up on the sofa,and I think we’ll be taking it to the park a lot this summer as it will be great for picnics!


Crochet Sunflower Pincushion

Well it feels like summer is on it’s way….well a British summer anyway….and I personally can’t wait.  I love seeing the garden burst into colour and one of my favourite flowers are sunflowers.  We grow them ever year next to our little blue shed and my husband always complains they grow too tall but I love them, and so does Pip.

I’d been mulling this idea over in my head for a while and I recently got the time to sit down and figure out how the pattern would work and how I could construct it.  I haven’t written many patterns so be patient with me!

Ok here’s what you’ll need:

– Rico Essentials Cotton (DK) in Grass Green, Nougat and Banana (one ball of each would make 3-4 of these pincushions)

-3mm crochet hook

– Wool needle for sewing in ends

– a stitch marker

– Toy stuffing

– Bumblebee button for  decoration (optional)

[NB I’m using US stitch terms]

Now getting started…I’ve done this slightly different to the normal circle increases as that gives a bit of a hexagonal look.  So I’ve staggered the increases so they’re not always in the same place which gives a nicer circle shape.

1. Make a magc loop with the brown cotton and do 6sc into the loop (6st)

2. Do 2sc into each of the stitches making sure to put a stitch marker in your first stitch of the round (12st)

3. 2sc (increase) in the first stitch, sc in the next, *2sc, sc* repeat all the way round (18st)

4.  sc, *2sc, sc, sc*, repeat all the way round, sc in last stitch (24st)

5. *2sc, sc in the next 3 stitches* repeat all the way round (30st)

6. sc in first 3 stitches, *2sc, sc in the next 4* repeat, ending with sc in last stitch (36st)

7. *2sc, sc in next 5* repeat all the way round (42st)

8. sc in first 4 stitches, *2sc, sc in next 6 stitches* repeat, sc into last 2 stitches (48st)

9. *2sc, sc in next 7 stitches* repeat all the way round (54st)

10. sc in first 5 stitches, *2sc, sc in next 8 stitches* repeat, sc in the last 3 stitches (60st)

Then do 3 rounds of sc in every stitch (so rows 11,12 and 13 – no increases, just sc all the way round).  This will make it start to curl upwards into a kind of half ball shape.

Fasten off the brown yarn and weave in the ends.

I then turned this inside out as I felt what was the inside of my work looked better for the middle of a sunflower than the other side (other side pictured below)

 So here it is turned inside out (below).  Now attach the yellow yarn and I’ll show you how to make the petals…

To make a petal chain 9 stitches.

Slip stitch into the 2nd chain from the hook, then slip stitch into the next chain down as well.  Sc in the next chain, hdc in the next chain, dc in the next two chains, and then treble into the last two chains.

To summarise: skip 1st ch, sl st, sl st, sc, hdc, dc, dc, tr, tr.

(or if you want the UK terms: skip 1st ch, sl st, sl st, dc, htr, tr, tr, dtr, dtr)

It should look like this:

  Then skip 3 stitches completely around the edge of the brown circle and slip stitch into the 4th stitch along to join….like so:

  Then we start on the next petal, so ch9 again and repeat the petal pattern.

  Repeat all the way around the circle and you’ll end up with 15 petals.  Don’t worry if they curl up, we’ll fix that at the end.  Fasten off the yellow yarn and weave in your ends.
Now you need to repeat the pattern for the brown circle (flower inner) using the green yarn.  This will be the base of the pincushion.  Work exactly the same but don’t turn it inside out this time.

Then add petals in the same way as we did to the brown part of the flower.  As we haven’t turned this part inside out, when we put the two sides together all the petals will curl upwards – like a real sunflower.

Again weave in your ends. You should have 2 pieces now that look like this….

Now I’ll show you how to sew them together.

Position the green base under the brown so that the petals are offset in the gaps, like this….

Then using a length of the brown cotton and your needle we will sew around the edge of the circles using a simple running stitch.  If you tie a knot in the end of your cotton make sure you start from inside the flower (this is going to be stuffed anyway but it’ll hide your end).  Make sure the petals are offset as you work around.

When you are about 3 inches from getting all the way around, stop and stuff the flower.  Use small pieces of stuffing to ensure it is stuffed evenly, and you want to pack it in quite firmly so you have a nice solid pincushion for your pins.  Once you’re happy with the stuffing, sew up the remaining edge, fasten off and weave in.

I added a little bee button for decoration but this is optional.  If the  petals are a bit curled, gently manipulate them into shape – this worked fine for mine.  You could always steam them if you wish.

And voila! It’s finished! Photos below 🙂

I hope that all made sense, any questions just let me know!x
Please note:

Crochet Sunflower Pincushion Pattern and Tutorial – Copyright, Holly George 2015.

This is a free pattern for personal use only – you can not sell the finished items without my permission (you can make them as gifts).  Do not publish this pattern (or any part of it) without my permisson but feel free to link to my blog if you wish.


Yarn pegs – Playing with Colour

I’ve been meaning to make some of these yarn colour pegs since I saw the idea on the lovely Attic 24 blog last year.

 I’ve always been a fan of Stylecraft Special DK yarn and have amassed quite the stash by working on various projects.  I tend to have favourite colours I use more than others – magenta, turquoise, aspen….I’m definitely a fan of the ‘cooler’ shades of the spectrum! But I want to play around with colour combinations more, which is why these pegs are perfect.


They are so easy to do – no glue necessary – just clamp both ends of yarn in the end of the peg that opens.  Its also great for using up little scraps!

Stylecraft have just brought out a shade card which is handy if you don’t want to make your own, but I like being able to move the colours around and sit them next to each other – and wooden pegs are pretty cheap (I found some bargain pegs on amazon).

It turns out I have 46 of the 72 shades in my stash – I honestly thought it would be more! (I also highly suspect I have some more hidden around the house which I have hidden so well from hubby I have forgotten where it is!). I’m resisting the urge to rush out and buy the missing shades…I can add to this collection as and when I use the colours for new projects.

Anyway I’m already having fun playing with colour schemes…here’s a pic of the colours I used for my just-finished Cath Kidston inspired blanket:


And here are the colours from another recent blanket:



 I also got hold of the three newest shades of Stylecraft Special DK – Sage, Storm Blue and Parma Violet, I think they go beautifully with Silver and Wisteria (mental note to make something with this colour scheme!)



And here’s a peek at the colours for my next project- an order for a friend…can you guess what it will be?


There’s been a great discussion on my Instagram this morning about people’s favourite shades – pomegranate, fondant, sherbert and cloud blue all seem very popular! I’d love to hear what your favourite shade is if you want to leave me a comment – I must try and get out of my colour comfort zone 😉


Reversible Rainbow Crochet Cushion – Tutorial

So I’ve been crocheting for more than three years now….I’ve made endless blankets, toys, coasters, socks, baskets….you name it! But for some reason I’ve never made a crochet cushion.  The other day I looked at our sofa and thought it was in need of a bit of a facelift, and inspired by @sweet_sharna on Instagram (who has the BEST collection of crochet cushions I’ve seen – if you’re not already following her you should be!) I decided to get cracking.  Maybe it’s because of all the grey cloudy weather, and my impatience for summer, that I knew this had to be a happy, bright, colourful cushion. 

I love using cotton – it’s durable and gives great stitch definition, so I opted for  Rico Creative Cotton.  The colours are fantastic and it’s Aran weight which I think is perfect for this cushion.   Here’s a list of what you will need if you want to have a go at making this cushion:

– Rico Creative Cotton (50g balls)  in the following shades:

White (x2), Turquoise, Light Green, Candy Pink, Light Yellow and Cherry.

– 4x buttons (I used 20mm sized ones from John Lewis)

– a 3.5mm crochet hook (I used a Clover Amour)

– cushion pad – this cover fits a 45cm x 35cm size cushion

– a wool needle for sewing in your ends

– a needle and thread for sewing on your buttons

One side of my cushion is made up of mini granny squares in the 5 colours (not white).  These are so quick and easy to make as you’re only making one round.  If you’re not familiar with how to make these here’s a brief explanation.


Ch 5, and slip stitch into first chain stitch to join which makes your foundation ring.

Ch 3, then do two treble crochet stitches (UK terms) into the middle of the ring. *Ch3, then 3tc into the ring* Repeat between ‘*’ twice more – this will give you four ‘clusters’ which will be the sides of your square.  Then Ch3 and slip stitch join to the 3rd chain of your first cluster (the Ch3 youmade after your foundation ring).  

Cut a tail, and pull it through the last loop on your hook to fasten off.

You will need 56 of these mini squares (it will be 8 wide and 7 down) so make 11 of each and 1 extra in any colour (I had an extra green one).

The second round of the squares is done in white and is also how the squares are joined, using the Join As You Go method – if you’ve not done this before it’s worth learning as it saves a lot of time, Attic 24 has a great tutorial here. Here’s a picture of the layout I used – I didn’t want any colours too close together so there is an order to it but without it looking too planned (I hope!)


It’s worth checking at this point that it’s looking the right size for your cushion pad.  On a 3.5mm hook my squares were 5cm square once the white round was added.  If yours are slightly smaller you could always add a border of double crochet (or two rows if it needs it) to get to the required size.  If you place it on top of your cushion it should just reach the seams on the sides.

The back of my cushion I decided to do in Granny Stripes.  There was a few reasons for this…I was a little bored of making granny squares by now….I’d used up all my white yarn joining the squares together, but had loads of the coloured cotton left…and why not have a different pattern on the other side?! it makes it reversible and you get two different looks!

My chain for my stripes was 84ch +2 (in all honesty if I did it again I’d make it 81+2 or maybe even 78 +2 as my back was a teeny bit bigger than the front).  Again if you need a good tutorial for granny stripes Attic 24 is fantastic (can you tell I’m a fan!?) – here’s a link to her version. If you’ve been doing them for ages just crack on!  Here’s the colour order for my stripes…


My cushion back was 31 rows (not inc the chain and DC first row). But check the size as you go along and compare it to the size of your cushion front made of granny squares.

Then of course you have the fun of sewing in the ends….all those ends……



Once all the ends are sewn in we can then join the cushion parts together.  You’ll need to join them on three sides – if you’re looking at the cushion the right way up, we’ll join the right hand side, then the top, then the left hand side.  

I used some leftover white cotton from another project but you could use one of the colours -there should be enough left.  Positioning the cushion parts wrong sides together, and starting at the bottom right hand side of the cushion, double crochet the two pieces together.  You need to crochet under the two loops of the front and two loops of the back part of the cushion. This is easy for the top of the cushion where the stitches will line up easily.  For the sides it can be trickier as the you’ll be working into the sides of the granny stripes.  Just keep the pieces lined up and space the stitches out evenly using the front of the cushion stitches as a guide.

Once the three sides are joined, move on to the 4th side – the bottom of the cushion.  Work a row of dc across the front side of the cushion only – this will strengthen the edge of the front of  the cushion.  When you get to the end turn your work.  I didn’t need to add any more to the size of my cushion so I slipped stitched my way back along to make buttonholes.  I spaced them one square in from each end and then 2 squares in again on each side, making 4 in total.  To make the button holes, I chained 4 and missed 3 stitches along then joined it back on and kept slip stitching along.  Here’s a close up which hopefully helps show how they look.


Once done, sew in your ends. Then position your buttons to line them up with your buttoholes – you’ll sew them to the edge of your cushion back.  Like this…


And voila! One completed reversible crochet cushion!




This is the first tutorial I’ve written on here so I hope you’ve found it useful/interesting! If there’s anything I’ve missed out or if you have any questions please do leave me  a comment and I’ll try and answer as best as I can 🙂


Hello Deer – a super cute baby blanket using tapestry crochet

This project has been ongoing for a while.  I first fell in love with the Hello Deer Baby Blanket pattern by Little Doolally when I saw my lovely Instagram friend @littlecosythings (if you haven’t already followed her, you should – she’s so talented!) making one.  I’d been itching to try tapestry crochet but hadn’t found a project which captured my imagination until spotting this one – it’s just adorable! My best friend had recently announced her second pregnancy so I decided this would be the perfect new baby gift.

I opted to use Caron Simply Soft yarn for the blanket – it’s Aran weight as recommended in the pattern but also hard wearing and I love their colour range.  I used the following:

Chartreuse (green), Chocolate for the body, Light Country Blue for the main background colour, and small amounts of Off White and Victorian Rose.  I also used some DK yarn for the nose, eyes and flower.

The chart in Little Doolally’s pattern is great and really easy to read and it was definitely one of those projects I couldn’t put down!

A few people have asked me to share how I did the fabric backing for this so here are my thoughts…though I think it would vary depending on the project and weight of yarn etc.

This pattern involved stranding the yarn across the back of the work as you work with the different colours – you can’t crochet over them as there’s often 2-3 colours in a row and it would  end up being very thick and uneven in places.  So while stranding is the best solution, the result is the wrong-side of the blanket needs covering – hence the fabric backing.

I’d been holding off doing this bit until I found out what my friend was having – and she had a little boy! So I opted for a white cotton fabric with blue stars.  There are instructions included in Little Doolally’s pdf and I don’t want to give away her pattern but you need to fold over a hem and iron some sharp corners before pinning the fabric into place.  I made mine bigger than recommended as I wanted it to sit closer to the border.  I used a simple hand sewing stitch (technically overcast stitch) to attach it.  Make sure you don’t pull the fabric taut – it will cause the blanket to pucker on the other side! I made this mistake and had to re-do it! Make sure the blanket and fabric are both lying flat when you’re pinning it into place.


I’ve used cotton but you could use flannel or fleece if you wanted – this blanket was quite thick already so I didn’t want to add bulk, which is why the cotton is perfect.  I also pre-washed it to avoid future shrinkage.

And below is the finished blanket! It measures 22.5″x 19.5″ – the perfect size for a pram blanket or it could be used as a little playmat!

Happy Rainbow Squares Blanket

With all this grey weather we’ve been having in London lately I’ve been itching for some colour….so on a whim I started a new baby blanket.  After raiding my Stylecraft Special DK stash I decided on a a rainbow of colours! Lipstick, Shrimp, Sunshine, Aspen, Cloud Blue, Turquoise and Magenta.

To make the most of these bright shades I opted for solid granny squares.  Just three rounds big and with no colour change these were so quick and easy to make! If you haven’t made a solid granny square before there’s a great tutorial over on Little Tin Bird.

As this is only a baby blanket (perfect size for a moses basket or car seat) it only needed 49 squares (7×7), meaning 7 of each colour.  

These are honestly so quick that it only took a couple of days to make the squares. To make the colours pop I decided on cream as a joining colour, and by using the flat slip stitch join technique I got a nice, neat finish.  The trickiest bit was probably deciding on what border to put on it.

I bought this book a while ago after seeing it recommended on Instagram- ‘Around the Corner – Crochet Borders’ by Edie Eckman.  It’s got a lot of variety but I would say I found most of them a bit fussy for my taste. But I persevered and found one in there I liked (#20 if you’re interested!)

This has been a really quick, fun blanket to make – 4 days in total! With the border included it measures 23″ square (using a 4mm hook).  And here it is…..tada!